Septic Systems

• Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Systems & Packages

Recirculating Media Filter

Zoeller® Recirculating Media Filters (RMF) provide proven, below-grade wastewater treatment for residential, commercial, and small community applications. Using aerobic organisms and gravel media, RMFs produce better-than-secondary quality effluent with minimal maintenance. Available in capacities from 450 to 36,000+ GPD, with...

• Environmental

Bull Run® Valve

170-0022

Bull Run® Valve is designed to direct flow between alternate septic fields or systems. The user has no contact with wastewater due to the valve’s leak proof and external operating characteristics. The changeover from one drain field to another can...

• Systems & Packages

Turbine STEP Vault

5041-0001

The 5041 series Turbine STEP (Septic Tank Effluent Pump) vaults are designed to pump filtered septic effluent from a solids environment such as a septic tank or dose tank. Applications such as cluster systems and drip irrigation systems will benefit...

• Systems & Packages

Tru-Flow® Splitter System

173-0001

The Tru-Flow® Splitter System is designed for use in gravity lateral fields.  It provides you with the ability to ensure that all lateral lines are receiving equal flow, even after it has been buried and settled.  A significant improvement over...

• Systems & Packages

6402 Two Outlet Automatic Multizone Valve

170-0069

The Model 6402 Automatic Multizone Valve is designed for use in residential and commercial septic systems. This corrosion resistant valve will provide the dependability expected from a Zoeller and is backed by a 1-year warranty.

• Systems & Packages

Four Outlet Multizone Valve Assembly

5053-0003

Dosing four zones for lateral fields, drip irrigation systems or treatment systemscan easily be accomplished by using a four zone multizone assembly. Multizone assemblies come preassembled with multizone valve, unions, piping, and shut-off valves to make on the job installation...

• Environmental

Bull Run® Valve

170-0022

Bull Run® Valve is designed to direct flow between alternate septic fields or systems. The user has no contact with wastewater due to the valve’s leak proof and external operating characteristics. The changeover from one drain field to another can...

• Accessories & Parts

Standard APak® Outdoor Alarm System With Mechanical Float

91104-0001

The Outdoor APak® Alarm System provides an audible and visual warning in the event of high liquid in pump basin.  The NEMA 4X enclosure ensure that it can withstand changing weather conditions.  The system comes with a 15' variable level...

• Accessories & Parts

Economy Riser System

5086-0001

Our economy riser systems allows for an easier access to your septic tank lid by eliminating the need to locate and dig up the tank's concrete cover each time you need to access the septic tank. The risers are available...

• Check Valve

1-1/2″ Tri-Check® Valve

30-0100

The 1-1/2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

2″ Unicheck Plastic Check Valve

30-0021

The 2" unicheck plastic check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Sump

BN53 Effluent Pump with 15′ Cord and Switch

53-0029

The 3/10 HP Model BN53 nonautomatic Effluent Pump with a variable level float switch is designed for use in sump or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year...

• Systems & Packages

Recirculating Media Filter

Zoeller® Recirculating Media Filters (RMF) provide proven, below-grade wastewater treatment for residential, commercial, and small community applications. Using aerobic organisms and gravel media, RMFs produce better-than-secondary quality effluent with minimal maintenance. Available in capacities from 450 to 36,000+ GPD, with...

• Systems & Packages

Turbine STEP Vault

5041-0001

The 5041 series Turbine STEP (Septic Tank Effluent Pump) vaults are designed to pump filtered septic effluent from a solids environment such as a septic tank or dose tank. Applications such as cluster systems and drip irrigation systems will benefit...

• Systems & Packages

Tru-Flow® Splitter System

173-0001

The Tru-Flow® Splitter System is designed for use in gravity lateral fields.  It provides you with the ability to ensure that all lateral lines are receiving equal flow, even after it has been buried and settled.  A significant improvement over...

• Systems & Packages

6402 Two Outlet Automatic Multizone Valve

170-0069

The Model 6402 Automatic Multizone Valve is designed for use in residential and commercial septic systems. This corrosion resistant valve will provide the dependability expected from a Zoeller and is backed by a 1-year warranty.

• Systems & Packages

Four Outlet Multizone Valve Assembly

5053-0003

Dosing four zones for lateral fields, drip irrigation systems or treatment systemscan easily be accomplished by using a four zone multizone assembly. Multizone assemblies come preassembled with multizone valve, unions, piping, and shut-off valves to make on the job installation...

• Systems & Packages

Six Lateral Spider Valve®

5051-0034

The Spider Valve® assembly is designed to equally split septic effluent under pump pressure into 6 lateral lines.  It will proportionally split flow to lateral lines of unequal length when a traditional distribution box cannot.  It is ideal for drain...

• Control Panel

20′ Variable Level Control Switch

10-0744

The variable level control switch allows you to adjust the on and off points in a pump tank.  Intended for use with a control panel, the float signals to the control panel to activate a nonautomatic pump based on the...

• Accessories & Parts

Wi-Fi Gateway

90002-0001

For use with Pivot Pro and LPS control panels. Connect Z Control® Enabled Zoeller Products to the Z Control® Cloud. Use this Gateway with compatible products such as the Pivot Pro Series, Pivot Pro+ Series, and Low Pressure Sewer System...

• Accessories & Parts

Duplex Time Dose Control Panel, 0-15 Amps

10-5456

The duplex time dose panel is single phase 115/208/240V, duplex panel, with  LEDs, buzzer, globe, dry contacts, 7-15 amps and timer functions.  It has a NEMA 4X enclosure, opaque door,  and includes a cycle counter and elapsed time meter.

• Control Panel

Simplex Time Dose Control Panel, 0-15 Amps

10-5454

The simplex time dose panel is a single phase 115/208/240V, simplex panel, with  LEDs, buzzer, globe, dry contacts, 7-15 amps and timer functions.  It has a NEMA 4X enclosure, opaque door,  and includes a cycle counter and elapsed time meter.

• Control Panel

Simplex Pivot RL Control Panel, 0-20 Amps

51354-0002

Pivot RL is the newest control panel designed and made by Zoeller.  It is 1Ph, 115/208/240v, Simplex, with basic LEDs, buzzer, globe, and dry contacts.  The 51354-0002 variation additionally includes a cycle counter and elapsed time meter.  Please note that...

• Systems & Packages

Turbine STEP Vault

5041-0001

The 5041 series Turbine STEP (Septic Tank Effluent Pump) vaults are designed to pump filtered septic effluent from a solids environment such as a septic tank or dose tank. Applications such as cluster systems and drip irrigation systems will benefit...

• Turbine Effluent

Model 5030 Turbine Pump- 11 GPM- 7 Stage

5030-0007

The 1/2 HP 11 GPM Turbine Effluent Pump is designed to be used in septic system applications that demand more head than a traditional single stage centrifugal submersible pump can deliver. Ideal for pressure sewers, STEP systems and subsurface drip...

• Check Valve

1-1/2″ Tri-Check® Valve

30-0100

The 1-1/2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

2″ Unicheck Plastic Check Valve

30-0021

The 2" unicheck plastic check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Pumps

N53 Effluent Pump with 35′ Cord

53-0028

The 3/10 HP Model N53 Sump Pump with a 35' cord is designed to remove groundwater from basement sump, effluent, or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year...

• Accessories & Parts

Standard APak® Outdoor Alarm System With Mechanical Float

91104-0001

The Outdoor APak® Alarm System provides an audible and visual warning in the event of high liquid in pump basin.  The NEMA 4X enclosure ensure that it can withstand changing weather conditions.  The system comes with a 15' variable level...

• Sump

BN53 Effluent Pump with 15′ Cord and Switch

53-0029

The 3/10 HP Model BN53 nonautomatic Effluent Pump with a variable level float switch is designed for use in sump or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year...

• Pumps

BN98 Effluent Pump with 15′ Cord and Switch

98-0005

The 1/2 HP Model BN98 nonautomatic Effluent Pump with a variable level float switch is designed to remove groundwater from sump or septic system applications. This high pressure and high flow pump will provide the dependability expected from a Zoeller...

• Pumps

E161 Effluent Pump with 20′ Cord

161-0004

The 1/2 HP Model E161 nonautomatic Effluent Pump is designed to remove grey water or effluent from effluent lift station or elevator vault applications.  This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a...

• Accessories & Parts

15′ 13 Amp Single Piggyback Variable Level Float Switch

10-0034

The 15’ single piggyback variable level float switch allows you to adjust the on/off points on a nonautomatic pump rated for 115 V and 13 amps or less.  The switch can be used in a variety of applications including sump,...

• Pumps

N53 Effluent Pump with 35′ Cord

53-0028

The 3/10 HP Model N53 Sump Pump with a 35' cord is designed to remove groundwater from basement sump, effluent, or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year...

• Sump

BN53 Effluent Pump with 15′ Cord and Switch

53-0029

The 3/10 HP Model BN53 nonautomatic Effluent Pump with a variable level float switch is designed for use in sump or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year...

• Pumps

BN98 Effluent Pump with 15′ Cord and Switch

98-0005

The 1/2 HP Model BN98 nonautomatic Effluent Pump with a variable level float switch is designed to remove groundwater from sump or septic system applications. This high pressure and high flow pump will provide the dependability expected from a Zoeller...

• Pumps

E161 Effluent Pump with 20′ Cord

161-0004

The 1/2 HP Model E161 nonautomatic Effluent Pump is designed to remove grey water or effluent from effluent lift station or elevator vault applications.  This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a...

• Turbine Effluent

Model 5030 Turbine Pump- 11 GPM- 7 Stage

5030-0007

The 1/2 HP 11 GPM Turbine Effluent Pump is designed to be used in septic system applications that demand more head than a traditional single stage centrifugal submersible pump can deliver. Ideal for pressure sewers, STEP systems and subsurface drip...