Customers Also Buy
- Residential / Light Commercial
4 Float Bracket Assembly
The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.
The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time. The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of pumping applications. The float switch cord is 15′.
Have a question? Give us a call!
877-710-7867
Our narrow angle level control float are used to monitor liquid level conditions and activate control panels or alarms. This version includes a 15′ cord and weight. They are typically installed in dose tanks, sump pump basins, holding tanks, lift stations, and other non-potable water applications. The variable level control switch is normally open when hanging vertically above the liquid level. The switch should be mounted to the weight that is provided, giving the switch a pivot point. When the water level rises and the switch is raised a few degrees above the horizontal position, the switch closes, completing the circuit to the control panel or alarm. The float that encases the mechanical switch is constructed of durable PVC/polypropylene.
Shipping Weight:
3 kg
Shipping Dimensions:
Height 5 cm x Width 8 cm x Length 8 cm.
Cord Length:
15' (5 m)
Amps:
5
Operation:
Normally Open
On/Off Points:
Variable level float switch, customer sets
The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.
Color 1
Color 2
Color 3
Color 4
Color 5