Home » Applications » Stormwater Removal

Application

Stormwater Removal

During storms, excess water can lead to flooding, pollution, and damage. We offer a range of pumps, containers, and controls to manage your stormwater effectively.

Residential / Light Commercial
View All
1-1/4″ Z-Rail® Disconnect System image
  • Residential / Light Commercial
1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

15′ Variable Level Control Switch image
  • Residential / Light Commercial
15′ Variable Level Control Switch

10-0743

The narrow angle control float switch allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety...

2″ Cast Iron Full-Flow Unicheck image
  • Residential / Light Commercial
2″ Cast Iron Full-Flow Unicheck

30-0152

The 2" cast iron full flow unicheck is designed for basement sump pump, effluent and sewage applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

2″ Compression Unicheck image
  • Residential / Light Commercial
2″ Compression Unicheck

30-0020

The 2" compression unicheck valve is designed to prevent backflow in dewatering, effluent or sewage applications. This valve can be installed in the vertical or horizontal orientation in the discharge line.

2″ Z-Rail® Disconnect System image
  • Residential / Light Commercial
2″ Z-Rail® Disconnect System

39-0129

This 2" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

3″ Cast Iron Full-Flow Unicheck image
  • Commercial / Engineered Products
3″ Cast Iron Full-Flow Unicheck

30-0160

The 3" cast iron full flow unicheck is designed for basement sump pump, effluent, sewage, and stormwater removal applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Commercial / Engineered Products
View All
3″ Cast Iron Full-Flow Unicheck image
  • Commercial / Engineered Products
3″ Cast Iron Full-Flow Unicheck

30-0160

The 3" cast iron full flow unicheck is designed for basement sump pump, effluent, sewage, and stormwater removal applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

3″ Z-Rail® Disconnect System image
  • Residential / Light Commercial
3″ Z-Rail® Disconnect System

39-0123

This 3" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

4 Float Bracket Assembly image
  • Residential / Light Commercial
4 Float Bracket Assembly

10-0253

The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.

6150 Series image
  • Commercial Duty
6150 Series

0.5 HP Effluent or dewatering submersible pumps, 1.5” NPT vertical discharge

6160 Series image
  • Commercial Duty
6160 Series

0.5 or 1 HP Effluent or dewatering submersible pumps, 1.5”, 2” or 3” NPT vertical discharge

6180 Series image
  • Commercial Duty
6180 Series

0.5 or 1 HP Effluent or dewatering submersible pumps, 1.5”, 2” or 3” NPT vertical discharge