Home » Applications » Effluent Lift Stations

Application

Effluent Lift Stations

Effluent lift stations collect and pump the grey water or effluent from commercial facilities or wastewater treatment systems.

Check Valve

View All

Accessories & Parts

1-1/2″ Quiet Check Valve

30-0040

The 1-1/2" slip x slip full flow Quiet Check Valve provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge line.

Check Valve

1-1/2″ Clear Quiet Check Valve

30-0041

The 1-1/2" slip x slip full flow clear version of the Quiet Check Valve provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge...

Accessories & Parts

1-1/2″ Combo Check Valve

30-0102

The 1-1/2" combo check valve is designed for effluent and basement sump pump applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Check Valve

2″ Quiet Check Valve

30-0048

The 2" Quiet Check Valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Accessories & Parts

2″ Unicheck Cast Iron Check Valve

30-0151

The 2" unicheck cast iron check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Control Valve

Accessories & Parts

2″ Tri-Check® Valve

30-0101

Control Valve

2″ (3-Way) Ball Valve

30-0248

The 2" (3-way) ball valve is designed for effluent applications to allow pump isolation. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Control Valve

3″ Threaded Plug Valve

6030-0083

The 3" threaded plug valve is designed for effluent or sewage applications to allow pump isolation. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Junction Box

Accessories & Parts

Junction Box

10-1398

UL listed and CSA certified high impact, corrosion resistant, weatherproof thermoplastic junction box enclosure with flexible PVC gasket and brass screws. Pre-assembled at the factory for convenience and ease of installation.

QLS Series

Systems & Packages

QLS Series Lift Stations

Built with contractors in mind, QLS systems deliver unmatched reliability and customization.

Accessories & Parts

View All

Accessories & Parts

24″ x 48″ Fiberglass Basin

31-0866

Our 24" x 48" fiberglass basin with a fiberglass cover is an essential component for a lift station that collects and removes unwanted and water. This basin is often used to construct a complete lift station which often consists of...

Accessories & Parts

1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

Accessories & Parts

2″ Z-Rail® Disconnect System

39-0129

This 2" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

Accessories & Parts

3″ Z-Rail® Disconnect System

39-0123

This 3" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

Accessories & Parts