Sewage Lift Stations

• Accessories & Parts

1-1/2″ Quiet Check Valve

30-0040

The 1-1/2" slip x slip full flow Quiet Check Valve provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge line.

• Check Valve

1-1/2″ Clear Quiet Check Valve

30-0041

The 1-1/2" slip x slip full flow clear version of the Quiet Check Valve provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge...

• Accessories & Parts

1-1/2″ Combo Check Valve

30-0102

The 1-1/2" combo check valve is designed for effluent and basement sump pump applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Check Valve

2″ Quiet Check Valve

30-0048

The 2" Quiet Check Valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

2″ Unicheck Cast Iron Check Valve

30-0151

The 2" unicheck cast iron check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Control Valve

3″ Threaded Plug Valve

6030-0083

The 3" threaded plug valve is designed for effluent or sewage applications to allow pump isolation. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

Junction Box

10-1398

UL listed and CSA certified high impact, corrosion resistant, weatherproof thermoplastic junction box enclosure with flexible PVC gasket and brass screws. Pre-assembled at the factory for convenience and ease of installation.

• Systems & Packages

QLS Series Lift Stations

Built with contractors in mind, QLS systems deliver unmatched reliability and customization.

• Sewage

N267 Sewage Pump with 50′ Cord

267-0038

The 1/2 HP Model N267 Sewage Pump is designed to remove sewage from sewage ejector or septic applications.  This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year warranty, every pump is submerged...

• Sewage

M282 Sewage Pump with 10′ Cord

282-0001

The 1/2 HP Model M282 automatic Sewage Pump is designed to remove raw sewage, effluent or ground water in sewage or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year...

• Sewage

N282 Sewage Pump with 15′ Cord

282-0002

The 1/2 HP Model N282 nonautomatic Sewage Pump is designed for sewage or stormwater lift station applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year warranty, every pump is submerged in...

• Sewage

E282 Sewage Pump with 15′ Cord

282-0004

The 1/2 HP Model E282 nonautomatic Sewage Pump is designed to remove raw sewage, effluent or ground water in sewage or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year...

• Sewage

N282 Sewage Pump with 25′ Cord

282-0011

The 1/2 HP Model N282 nonautomatic Sewage Pump is designed to remove raw sewage, effluent or ground water in sewage or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year...

• Sewage

D284 Sewage Pump with 10′ Cord

284-0003

The 1 HP Model D284 automatic Sewage Pump is designed to remove raw sewage, effluent or ground water in sewage or septic applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year...

• Accessories & Parts

18″ X 30″ Poly Structural Foam Basin with 4″ hole

31-2229

Our indoor 18" x 30" poly structural foam basin is the essential component of a basement sump pit when additional capacity is desired.  This basin is designed to be buried flush-to-grade and to collect unwanted water.  It is ideally sized...

• Accessories & Parts

24″ x 48″ Fiberglass Basin

31-0866

Our 24" x 48" fiberglass basin with a fiberglass cover is an essential component for a lift station that collects and removes unwanted and water. This basin is often used to construct a complete lift station which often consists of...

• Accessories & Parts

1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

• Accessories & Parts

2″ Z-Rail® Disconnect System

39-0129

This 2" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

• Accessories & Parts

3″ Z-Rail® Disconnect System

39-0123

This 3" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

• Accessories & Parts

1-1/2″ Quiet Check Valve

30-0040

The 1-1/2" slip x slip full flow Quiet Check Valve provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge line.

• Accessories & Parts

1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

• Accessories & Parts

2″ Z-Rail® Disconnect System

39-0129

This 2" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

• Accessories & Parts

3″ Z-Rail® Disconnect System

39-0123

This 3" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

• Grinder

922 Simplex 24″ x 48″ Grinder Package with WDH820

922-0094

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model WDH820 Grinder Pump, 24" x 48" basin assembly, alarm panel, and float switches.

• Grinder

922 Simplex 24″ x 60″ Grinder Package with EI820

922-0066

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 60" basin assembly, control panel, and float switches.

• Grinder

922 Simplex 24″ x 72″ Grinder Package with EI820

922-0067

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 72" basin assembly, control panel, and float switches.

• Grinder

922 Simplex 24″ x 84″ Grinder Package with EI820 with 50′ Cord

922-0081

This prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 84" basin assembly, control panel, and float switches.

• Grinder

922 Simplex 24″ x 84″ Grinder Package with EI820 with 20′ Cord

922-0095

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 84" basin assembly, control panel, and float switches.

• Grinder

922 Simplex 24″ x 72″ Grinder Package with Reversing E840

922-0069

This prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model E840 Reversing Grinder Pump, 24" x 72" basin assembly, control panel, and float switches.

• Systems & Packages

QLS Series Lift Stations

Built with contractors in mind, QLS systems deliver unmatched reliability and customization.

• Grinder

922 Simplex 24″ x 48″ Grinder Package with WDH820

922-0094

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model WDH820 Grinder Pump, 24" x 48" basin assembly, alarm panel, and float switches.

• Grinder

922 Simplex 24″ x 60″ Grinder Package with EI820

922-0066

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 60" basin assembly, control panel, and float switches.

• Grinder

922 Simplex 24″ x 72″ Grinder Package with EI820

922-0067

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 72" basin assembly, control panel, and float switches.

• Grinder

922 Simplex 24″ x 84″ Grinder Package with EI820 with 50′ Cord

922-0081

This prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 84" basin assembly, control panel, and float switches.

• Grinder

922 Simplex 24″ x 84″ Grinder Package with EI820 with 20′ Cord

922-0095

This On the Shelf prepackaged basin assembly is everything you need to install your whole system as one item.  This includes a Model EI820 Grinder Pump, 24" x 84" basin assembly, control panel, and float switches.

• Accessories & Parts

20′ Variable Level Control Switch

10-0744

The variable level control switch allows you to adjust the on and off points in a pump tank.  Intended for use with a control panel, the float signals to the control panel to activate a nonautomatic pump based on the...

• Accessories & Parts

Wi-Fi Gateway

90002-0001

For use with Pivot Pro and LPS control panels. Connect Z Control® Enabled Zoeller Products to the Z Control® Cloud. Use this Gateway with compatible products such as the Pivot Pro Series, Pivot Pro+ Series, and Low Pressure Sewer System...

• Accessories & Parts

Simplex Pivot Control Panel, 7-15 Amps

31324-0001

The Simplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 7-15 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing a...

• Accessories & Parts

Simplex Pivot Control Panel, 15-20 Amps

31334-0001

The Simplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 15-20 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing a...

• Accessories & Parts

Duplex Pivot Control Panel, 0-7 Amps

32314-0001

The Duplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 0-7 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing two...

• Accessories & Parts

Duplex Pivot Control Panel, 0-20 Amps

32354-0001

The Duplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 0-20 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing two...

• Control Panel

Simplex Pivot Pro Control Panel, 2.5-4.0 Amps

114C4-0001

The Simplex Pivot Pro Control Panel for 200/230/460 V, 3 Ph lift station pump applications ranging from 2.5-4.0  Amps.  The panel comes with an LCD interface and built-in audible and visual alarms.  Now you can get Zoeller quality in the...

• Pivot Pro

Duplex Pivot Pro Control Panel, 2.5-4.0 Amps

124C4-0001

The Duplex Pivot Pro Control Panel for 200/230/460 V, 3 Ph lift station pump applications ranging from 2.5-4.0 Amps.  The panel comes with an LCD interface and built-in audible and visual alarms. Now you can get Zoeller quality in the...

• Pivot Pro

Duplex Pivot Pro Control Panel, 4.0-6.3 Amps

124D4-0001

The Duplex Pivot Pro Control Panel for 200/230/460 V, 3 Ph lift station pump applications ranging from 4-6.3 Amps.  The panel comes with an LCD interface and built-in audible and visual alarms. Now you can get Zoeller quality in the...

• Accessories & Parts

Duplex Pivot Pro Control Panel, 6-10 Amps

124E4-0001

The Duplex Pivot Pro Control Panel for 200/230/460 V, 3 Ph lift station pump applications ranging from 6-10 Amps.  The panel comes with an LCD interface and built-in audible and visual alarms. Now you can get Zoeller quality in the...

• Accessories & Parts

Duplex Pivot Pro Control Panel, 7-15 Amps

12324-0001

The Duplex Pivot Pro Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 7-15 Amps.  The panel comes with an LCD interface and built-in audible and visual alarms. Now you can get Zoeller quality in the...

• Pivot Pro

Duplex Pivot Pro Control Panel, 9-14 Amps

124F4-0001

The Duplex Pivot Pro Control Panel for 200/230/460 V, 3 Ph lift station pump applications ranging from 9-14 Amps.  The panel comes with an LCD interface and built-in audible and visual alarms. Now you can get Zoeller quality in the...

• Accessories & Parts

Simplex Pivot Pro Plus Control Panel, 15-20 Amps

23734-0001

The Duplex Pivot Pro+ Control Panel for 200/230 V, 1 Ph lift station pump applications ranging from 15-20 Amps.  The panel comes with an LCD interface, Auto Reversing, starter kit and built-in audible and visual alarms. Now you can get...

• Accessories & Parts

Duplex Pivot Pro Plus Control Panel, 9-14 Amps

244F4-0001

The Duplex Pivot Pro+ Control Panel for 200/230/460 V, 3 Ph lift station pump applications ranging from 9-14 Amps.  The panel comes with an LCD interface, Auto Reversing and built-in audible and visual alarms. Now you can get Zoeller quality...

• Control Panel

Duplex Pivot Pro Plus Control Panel, 15-20 Amps

24734-0001

The Duplex Pivot Pro+ Control Panel for 200/230 V, 1 Ph lift station pump applications ranging from 15-20 Amps.  The panel comes with an LCD interface, Auto Reversing, starter kit and built-in audible and visual alarms. Now you can get...

• Accessories & Parts

4 Float Bracket Assembly

10-0253

The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.

• Control Switches

25′ Narrow Angle Level Control Switch

10-1881

The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of...

• Accessories & Parts

18″ x 30″ Polyethylene Basin

31-2229

Our indoor 18" x 30" polyethylene basin is the essential component of a basement sump pit when additional capacity is desired.  This basin is designed to be buried flush-to-grade and to collect unwanted water.  It is ideally sized to accommodate...

• Accessories & Parts

2″ Unicheck Plastic Check Valve

30-0021

The 2" unicheck plastic check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Basins

24″ x 24″ Polyethylene Rotomold Basin

31-3046

Our simplex 24" x 24" polyethylene basin is an essential component of any sewage ejector system.  This basin is designed to be buried flush-to-grade in indoor or outdoor installations.  The observation port on the lid makes it easy to inspect...

• Accessories & Parts

2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Grinder

X72 HD Grinder Series

cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction Tested to FM standards 3600 and 3615 by CSA

• Accessories & Parts

18″ X 30″ Poly Structural Foam Basin with 4″ hole

31-2229

Our indoor 18" x 30" poly structural foam basin is the essential component of a basement sump pit when additional capacity is desired.  This basin is designed to be buried flush-to-grade and to collect unwanted water.  It is ideally sized...

• Accessories & Parts

24″ x 48″ Fiberglass Basin

31-0866

Our 24" x 48" fiberglass basin with a fiberglass cover is an essential component for a lift station that collects and removes unwanted and water. This basin is often used to construct a complete lift station which often consists of...

• Grinder

E810 Progressing Cavity Grinder Pump with 20′ Cord

810-0004

The Shark Series® 1 HP Model E810 nonautomatic Progressing Cavity Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller...

• Grinder

E815 Progressing Cavity Grinder Pump with 20′ Cord

815-0004

The Shark Series 2 HP Model E815 nonautomatic Progressing Cavity Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller...

• Grinder

EI820 Grinder Pump with 20′ Cord

820-0004

The Shark Series® 2 HP Model EI820 nonautomatic Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed...