Home » Residential / Light Commercial

Products

Residential / Light Commercial

Viewing  1 - 16  of  100

1-1/2″ Clear Quiet Check Valve image
  • Residential / Light Commercial
1-1/2″ Clear Quiet Check Valve

30-0041

The 1-1/2" slip x slip full flow clear version of the Quiet Check Valve provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge...

1-1/2″ Combo Check Valve image
  • Residential / Light Commercial
1-1/2″ Combo Check Valve

30-0102

The 1-1/2" combo check valve is designed for effluent and basement sump pump applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

1-1/4″ Z-Rail® Disconnect System image
  • Residential / Light Commercial
1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

15′ Variable Level Control Switch image
  • Residential / Light Commercial
15′ Variable Level Control Switch

10-0743

The narrow angle control float switch allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety...

18″ x 30″ Polyethylene Basin image
  • Residential / Light Commercial
18″ x 30″ Polyethylene Basin

31-2229

Our indoor 18" x 30" polyethylene basin is the essential component of a basement sump pit when additional capacity is desired.  This basin is designed to be buried flush-to-grade and to collect unwanted water.  It is ideally sized to accommodate...

2″ Cast Iron Full-Flow Unicheck image
  • Residential / Light Commercial
2″ Cast Iron Full-Flow Unicheck

30-0152

The 2" cast iron full flow unicheck is designed for basement sump pump, effluent and sewage applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

2″ Compression Unicheck image
  • Residential / Light Commercial
2″ Compression Unicheck

30-0020

The 2" compression unicheck valve is designed to prevent backflow in dewatering, effluent or sewage applications. This valve can be installed in the vertical or horizontal orientation in the discharge line.

2″ Quiet Check Valve image
  • Residential / Light Commercial
2″ Quiet Check Valve

30-0048

The 2" Quiet Check Valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.  

2″ Quiet Check Valve image
  • Residential / Light Commercial
2″ Quiet Check Valve

30-0042

The 2" Quiet Check Valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.  

2″ Tri-Check® Valve image
  • Residential / Light Commercial
2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

2″ Unicheck Cast Iron Check Valve image
  • Residential / Light Commercial
2″ Unicheck Cast Iron Check Valve

30-0151

The 2" unicheck cast iron check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

2″ Unicheck Plastic Check Valve image
  • Residential / Light Commercial
2″ Unicheck Plastic Check Valve

30-0021

The 2" unicheck plastic check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

2″ Z-Rail® Disconnect System image
  • Residential / Light Commercial
2″ Z-Rail® Disconnect System

39-0129

This 2" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

20′ Variable Level Control Switch image
  • Residential / Light Commercial
20′ Variable Level Control Switch

10-0744

The variable level control switch allows you to adjust the on and off points in a pump tank.  Intended for use with a control panel, the float signals to the control panel to activate a nonautomatic pump based on the...

24″ x 48″ Fiberglass Basin image
  • Residential / Light Commercial
24″ x 48″ Fiberglass Basin

31-0866

Our 24" x 48" fiberglass basin with a fiberglass cover is an essential component for a lift station that collects and removes unwanted and water. This basin is often used to construct a complete lift station which often consists of...

25′ Narrow Angle Level Control Switch image
  • Residential / Light Commercial
25′ Narrow Angle Level Control Switch

10-1881

The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of...