Home » Applications » Sewage Lift Stations » Page 2

Application

Sewage Lift Stations

Residential
View All
4 Float Bracket Assembly image
  • Accessories & Parts
4 Float Bracket Assembly

10-0253

The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.

25′ Narrow Angle Level Control Switch image
  • Control Panel
25′ Narrow Angle Level Control Switch

10-1881

The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of...

18″ x 30″ Polyethylene Basin image
  • Accessories & Parts
18″ x 30″ Polyethylene Basin

31-2229

Our indoor 18" x 30" polyethylene basin is the essential component of a basement sump pit when additional capacity is desired.  This basin is designed to be buried flush-to-grade and to collect unwanted water.  It is ideally sized to accommodate...

2″ Unicheck Plastic Check Valve image
  • Accessories & Parts
2″ Unicheck Plastic Check Valve

30-0021

The 2" unicheck plastic check valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

24″ x 24″ Polyethylene Rotomold Basin image
  • Basins
24″ x 24″ Polyethylene Rotomold Basin

31-3046

Our simplex 24" x 24" polyethylene basin is an essential component of any sewage ejector system.  This basin is designed to be buried flush-to-grade in indoor or outdoor installations.  The observation port on the lid makes it easy to inspect...

2″ Tri-Check® Valve image
  • Accessories & Parts
2″ Tri-Check® Valve

30-0101

The 2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Commercial
X72 HD Grinder Series image
  • Grinder
X72 HD Grinder Series

cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction Tested to FM standards 3600 and 3615 by CSA