Model 818 Grinder Pump

The 1 HP Model N818 nonautomatic Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product SKU:

818-0002-1
Categories:

Have a question? Give us a call!

877-710-7867
Model 818 Grinder Pump

The 1 HP Model N818 nonautomatic Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product Details

Our Model N818 Sewage Grinder Pump is designed to pump raw sewage in a sewage application.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″. The 115 Volt, 1 HP, Model 818 utilizes a vortex impeller.

The N818 should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 818 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product Specifications

Horsepower:

1 HP

Voltage:

115 V

Phase:

1 Ph

Amps:

13.6

Hertz:

60 Hz

RPM:

3450

Discharge:

1-1/4" NPT

Solids Handling:

Slurry

On/Off Points:

Nonautomatic

Impeller Material:

Engineered plastic

Impeller Type:

Vortex

Cord Length:

20' (6 m)

Customers Also Buy
4 Float Bracket Assembly image
  • Accessories & Parts
4 Float Bracket Assembly

10-0253

The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.

20′ Variable Level Control Switch image
  • Control Switches
20′ Variable Level Control Switch

10-0744

The variable level control switch allows you to adjust the on and off points in a pump tank.  Intended for use with a control panel, the float signals to the control panel to activate a nonautomatic pump based on the...

25′ Narrow Angle Level Control Switch image
  • Control Switches
25′ Narrow Angle Level Control Switch

10-1881

The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of...