Accueil " Accessoires et pièces détachées " Page 2

Produits

Accessoires et pièces détachées

Visualisation  17 - 32  de  111

18″ X 30″ Poly Structural Foam Basin without Hole and Hub image
  • Accessoires et pièces détachées
18″ X 30″ Poly Structural Foam Basin without Hole and Hub

31-2325

Our indoor 18" x 30" poly structural foam basin is the essential component of a basement sump pit when additional capacity is desired. This basin is designed to be buried flush-to-grade and to collect unwanted water. It is ideally sized...

  • Accessoires et pièces détachées
18″ x 30″ Polyethylene Basin with Steel Cover

31-0615

Our indoor simplex 18" x 30" polyethylene basin with a steel cover is an essential component to the pump system that collects water or wastewater. This type of basin can be used indoors in a residential or light commercial building...

18″ x 22″ Polyethylene Basin image
  • Accessoires et pièces détachées
18″ x 22″ Polyethylene Basin

31-0444

The indoor 18" x 22" polyethylene basin is the essential component of a basement sump pit.  This basin is designed to be buried flush-to-grade and to collect unwanted water.  It is ideally sized to accommodate a primary sump pump, check...

24″ x 48″ Fiberglass Basin image
  • Accessoires et pièces détachées
24″ x 48″ Fiberglass Basin

31-0866

Our 24" x 48" fiberglass basin with a fiberglass cover is an essential component for a lift station that collects and removes unwanted and water. This basin is often used to construct a complete lift station which often consists of...

  • Accessoires et pièces détachées
18″ Couvercle de bassin de décantation

17-0294

Our 18" sump basin cover is made of polyethylene with a 1-1/2" discharge along with an opening for the cord to go through the cover. A cover should be installed on a basin to prevent debris and other objects from...

18″ Riser for Outdoor 24×24 Sewage Ejector System image
  • Accessoires et pièces détachées
18″ Riser for Outdoor 24×24 Sewage Ejector System

10-5157

18″ Riser allowing below grade burial of piping and electrical.

8″ Extension for Indoor 24×24 Sewage Ejector System image
  • Accessoires et pièces détachées
Extension de 8″ pour le système d'éjection des eaux usées 24×24 intérieur

31-3108

This extension increases the basin height by 8” to allow deeper burial for longer pitched pipe runs. This is designed to fit on our 24 x 24 basin.

PSF Extension for 18×30 Basin (12″ Tall) image
  • Accessoires et pièces détachées
PSF Extension for 18×30 Basin (12″ Tall)

31-1473

This extension increases the basin height by 6” to allow deeper burial for longer pitched pipe runs. This is designed to fit on our 18 x 30 basin.

PSF Extension for 18×30 Basin (6″ Tall) image
  • Accessoires et pièces détachées
PSF Extension for 18×30 Basin (6″ Tall)

31-1476

This extension increases the basin height by 6” to allow deeper burial for longer pitched pipe runs. This is designed to fit on our 18 x 30 basin.

Fiberglass Extension for 18×30 Basin (12″ Tall) image
  • Accessoires et pièces détachées
Extension en fibre de verre pour bassin 18×30 (12″ de hauteur)

31-0558

This extension increases the basin height by 12” to allow deeper burial for longer pitched pipe runs. This is designed to fit on fiberglass basins.

Fiberglass Extension for 18×30 Dia Basin (6″ Tall) image
  • Accessoires et pièces détachées
Extension en fibre de verre pour bassin de 18×30 Dia (6″ de haut)

31-0566

This extension increases the basin height by 6” to allow deeper burial for longer pitched pipe runs. This is designed to fit on fiberglass basins.

1-1/4″ or 1-1/2″ Slip x Slip Check Valve image
  • Accessoires et pièces détachées
1-1/4″ or 1-1/2″ Slip x Slip Check Valve

30-0181

The standard 1-1/4" - 1-1/2" slip x slip full flow check valve is designed for basement sump pump or drain pump applications. This valve can be installed in the vertical or horizontal orientation in the discharge line.

  • Accessoires et pièces détachées
1-1/2″ Inline Check Valve

30-0238

The standard 1-1/2" inline check valve is designed for basement sump or drain pump applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

  • Accessoires et pièces détachées
Système de déconnexion 1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

  • Accessoires et pièces détachées
Système de déconnexion 2″ Z-Rail

39-0129

This 2" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

  • Accessoires et pièces détachées
Système de déconnexion 3″ Z-Rail

39-0123

This 3" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.