E815 Progressing Cavity Grinder Pump with 20′ Cord

  • 230 V progressing cavity grinder pump for sewage lift stations
  • 2 HP, oil-filled motor and cast iron motor housing for optimal heat dissipatio
  • 100% Testé en usine
  • Voir plus de détails

The Shark Series 2 HP Model E815 nonautomatic Progressing Cavity Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

Référence produit :

815-0004

Code produit universel :

053514184919
2
année limitée
garantie
Catégories
2
année limitée
garantie

Une question ? Appelez-nous !

877-710-7867
E815 Progressing Cavity Grinder Pump with 20' Cord
E815 Progressing Cavity Grinder Pump with 20' Cord

The Shark Series 2 HP Model E815 nonautomatic Progressing Cavity Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

Détails du produit

The Shark Series® Model 815 Progressing Cavity Grinder Pump is designed to pump raw sewage in sewage ejector applications when pumping to pressurized sewer main.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.

The E815, should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 815 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.

Chaque pompe est immergée dans l'eau et testée selon sa courbe de performance publiée, garantissant qu'elle répond à vos attentes et vous procure une tranquillité d'esprit dès le déballage.

Caractéristiques et avantages
  • Moteur rempli d'huile et boîtier de moteur en fonte pour une dissipation optimale de la chaleur qui empêche la pompe de surchauffer
  • Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
  • La finition époxy thermolaquée offre une résistance à la corrosion et prolonge la durée de vie de la pompe dans les environnements difficiles.
  • Pressure relief valve helps prevent damage to your piping system when the pressures in the city main are greater than the pumps PSI rating
  • Stainless steel screws, handle and hardware to prevent rust and corrosion over the life of the pump
  • 100% Testé en usine - chaque pompe est immergée dans l'eau et testée en usine pour garantir qu'elle fonctionne comme prévu à la réception
  • Comes with a 2-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
Caractéristiques du produit

Expédition Poids:

91 kilogramme

Expédition Dimensions:

Height 24 3/4 cm   x   Width 12 cm   x   Length 15 cm.

Chevaux-vapeur

2 HP

Tension :

230 V

Phase :

1 Ph

Ampères

10.5

Hertz :

60 Hz

RPM :

1725

Décharge :

1-1/4" NPT horizontal

Manutention de solides :

Slurry

Points de marche/arrêt :

Variable level- customer set

Type de roue:

Hydraulic rotor and stator

Longueur du cordon :

6 m

Les clients achètent aussi
Duplex Pivot Control Panel, 7-15 Amps image
  • Pivot
Duplex Pivot Control Panel, 7-15 Amps

32324-0001

The Duplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 7-15 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing two...

Simplex Pivot Control Panel, 7-15 Amps image
  • Panneau de contrôle
Tableau de commande simplex, 7-15 ampères

31324-0001

The Simplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 7-15 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing a...

4 Float Bracket Assembly image
  • Accessoires et pièces détachées
4 Assemblage du support du flotteur

10-0253

The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.

20′ Variable Level Control Switch image
  • Interrupteurs de contrôle
20′ Variable Level Control Switch

10-0744

The variable level control switch allows you to adjust the on and off points in a pump tank.  Intended for use with a control panel, the float signals to the control panel to activate a nonautomatic pump based on the...

25′ Narrow Angle Level Control Switch image
  • Interrupteurs de contrôle
25′ Narrow Angle Level Control Switch

10-1881

The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of...