Série X6160

Product Details

APPLICATIONS

• Industrial dewatering
• Automotive repair facilities sumps
• Septic tank effluent
• Low pressure effluent sewers
• Quick change oil stations

PUMP:

• Solids: 3/4” (19 mm) spherical capability
• Discharge: 1-1/2”, 2” and 3” NPT vertical
• Seals – Buna-N elastomers. Upper: carbon/stationary ceramic/rotary.  Lower: carbon/stationary silicon carbide/rotary.
• Construction – cast iron ASTM A-48, Class 30, 30,000# tensile strength, protected with a corrosion-resistant, baked-on epoxy powder coating
• Seal leak probes
• Balanced concentric pump housing and impeller
• Attaching hardware – 304 stainless steel
• Square ring seals – Viton
• Impeller – Non-clogging cast iron vortex design
• Optional:
  • Additional cord length available
  • Silicon carbide seals
  • Non-sparking rail systems

MOTOR:

• Stator – Class B & F insulation and lead wires
• 416 stainless steel motor shaft
• Oil-filled motor housing
• Finned cast iron housing for faster heat dissipation
• Integral overload protection (1 Ph)
• Thermal sensors with lead wires (3 Ph)
• Ball bearings – upper and lower high carbon chromium steel
• cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
• Tested to FM standards 3600 and 3615 by CSA
• Power cable length – 25’ (8 m)

Features and Benefits

• 3/4” (19 mm) spherical capability solids handling
• 1-1/2”, 2” and 3” NPT vertical discharge
• Attaching hardware – 304 stainless steel
• Square ring seals – Viton
• Integral overload protection (1 Ph)
• Thermal sensors with lead wires (3 Ph)
• Ball bearings – upper and lower high carbon chromium steel
• cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
• 25' cord