Zoeller Pump Company

• Accessories & Parts

1-1/2″ Clear Quiet Check Valve

30-0041

The 1-1/2" slip x slip full flow clear version of the Quiet Check Valve provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge...

• Accessories & Parts

1-1/2″ Combo Check Valve

30-0102

The 1-1/2" combo check valve is designed for effluent and basement sump pump applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

1-1/2″ Compression Unicheck

30-0015

The 1-1/2" full flow check valve is designed for basement sump or drain pump applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

1-1/2″ Inline Check Valve

30-0238

The standard 1-1/2" inline check valve is designed for basement sump or drain pump applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

1-1/2″ Quiet Check Valve

30-0241

The 1-1/2" full flow Quiet Check Valve with hose clamp ends provides backflow prevention in basement sump pump or drain pump applications. This valve can be installed in either a vertical or horizontal orientation in the discharge line.

• Accessories & Parts

1-1/2″ Tri-Check® Valve

30-0100

The 1-1/2" Tri-Check Valve is designed for basement sump, septic system, and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

1-1/4″ or 1-1/2″ Slip x Slip Check Valve

30-0181

The standard 1-1/4" - 1-1/2" slip x slip full flow check valve is designed for basement sump pump or drain pump applications. This valve can be installed in the vertical or horizontal orientation in the discharge line.

• Accessories & Parts

1-1/4″ Z-Rail® Disconnect System

39-0135

This 1-1/4" vertical Z-Rail® System simplifies the installation and removal of a submersible pump from a basin. This design prevents the need to have to enter into the basin which is typically designated as a confined space entry.

• Accessories

1-1/4″ – 3″ NPT Cast Iron Check Valves

Valve accessories to complete your pump station

• Accessories

1-1/4″ – 3″ PVC Ball Valves

Valve accessories to complete your pump station

• Accessories

1-1/4″, 2″ Brass Ball Valves

Valve accessories to complete your pump station

• Accessories

1-1/4″, 2″ Brass/Bronze Check Valves

1-1/4″, 2″ Brass/Bronze Check Valves: 200 PSI WOG rated Metal to metal seals Vertical or horizontal installation Stops back-flow of...

• Accessories & Parts

10′ 13 Amp Single Piggyback Variable Level Float Switch

10-0055

Our 10' single piggyback variable level float switch allows you to convert a 115 V nonautomatic pump into an automatic pump if it draws 13 Amps or less of current.  This unit has a 10' cord.  The other real advantage...

• Systems & Packages

105 Standard Drain Pump with M53 with 9′ Cord

105-0001

The 3/10 HP Model 105 Drain Pump works for many applications where a gravity drain is not accessible or is cost prohibitive.  It is ideal for installing a sink drain in a kitchen or under a utility sink in unfinished...

• Systems & Packages

108 Crawl Space System with M53

108-0001

The 3/10 HP Crawl Space System eliminates water and dampness in tight or restricted areas that has pooling water or poor drainage. Add-on service for pest control operators, water-proofers, remodelers, structural repair services, and contractors.

• Pumps

109 Scale Removal System with N42

109-0005

The Zoeller® Model 109 Scale Removal System is a preassembled flushing solution designed to remove scale and mineral buildup from tankless water heating systems. Engineered to meet tankless water heater flushing requirements, the Model 109 provides a reliable maintenance tool...