M75 Sump Pump with 9′ Cord

  • 115 V automatic sump pump for use in basement sump application
  • 1/2 HP, oil-filled motor and cast iron motor housing for optimal heat dissipation
  • 100% Factory Tested
  • View More Details

The 1/2 HP Model M75 automatic Sump Pump is designed to remove groundwater from basement sump applications.  It is an ideal choice when greater pressure or flows are required in an economical pump.  Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product SKU:

75-0001

UPC:

053514361662
2
year limited
warranty
Categories: Brand:
2
year limited
warranty

Have a question? Give us a call!

877-710-7867
75-0001

The 1/2 HP Model M75 automatic Sump Pump is designed to remove groundwater from basement sump applications.  It is an ideal choice when greater pressure or flows are required in an economical pump.  Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product Details

Our Model M75 Sump Pump is designed to remove unwanted groundwater in basement sump applications. The 1/2 HP Model 75 is an economical option when a higher pressure or flow sump pump is required.  The Model 75 is compact, lightweight, economical, and backed by performance.  Additionally, it is a fully automatic sump pump with a built-in float switch.   So, it can be installed in minutes and depended upon for years.

The Model 75’s motor housing is constructed of cast iron to maximize heat dissipation.   The cap, pump housing, and base are constructed of engineered plastic.  This durable plastic allows the Model 75 to withstand a wide variety of basement sump conditions.  The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Features and Benefits
  • Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
  • Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
  • Corrosion resistant engineered plastic vortex impeller to allow free passage of solids which prevents clogging and lessens downtime
  • Engineered plastic float guard that prevents material or debris from collecting on the float ensuring proper operation every time
  • Compact and lightweight design allows the pump to fit in sump pits as small as 10" in diameter
  • Epoxy finish provides corrosion-resistance and extends the life of the pump in residential sump applications
  • Stainless steel screws and cord mounting hardware are rust resistant ensuring the pump can be relied upon for years of service
  • 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
  • Comes with a 2-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
Product Specifications

Shipping Weight:

16.5 kg

Shipping Dimensions:

Height 13 3/4 cm   x   Width 7 3/4 cm   x   Length 10 cm.

Horsepower:

1/2 HP

Voltage:

115 V

Phase:

1 Ph

Amps:

5.6

Hertz:

60 Hz

RPM:

3450

Discharge:

1-1/2" NPT

Solids Handling:

3/8" (9 mm) spherical solids

On/Off Points:

8-1/4" (21 cm) / 2-1/2" (7 cm)

Impeller Type:

Vortex

Cord Length:

10' (3.1 m)

Customers Also Buy
Standard APAK® Indoor Alarm With Reed Sensor image
  • Residential / Light Commercial
Standard APAK® Indoor Alarm With Reed Sensor

10-4011

The Indoor APak® Alarm System provides an audible and visual warning in the event of high liquid in pump basin. The system comes with a 15' reed sensor-style float switch and a 6' power cord.  

Aquanot® Spin 508 image
  • Residential / Light Commercial
Aquanot® Spin 508

508-0005

The AquaNot Spin 508 is a battery backup pump system that should be paired with a primary pump in the basement sump that will remove water even during a power outage.

1-1/4″ or 1-1/2″ Slip x Slip Check Valve image
  • Residential / Light Commercial
1-1/4″ or 1-1/2″ Slip x Slip Check Valve

30-0181

The standard 1-1/4" - 1-1/2" slip x slip full flow check valve is designed for basement sump pump or drain pump applications. This valve can be installed in the vertical or horizontal orientation in the discharge line.

M98 Sump Pump with LED Plug and 9′ Cord image Top Choice
  • Residential / Light Commercial
M98 Sump Pump with LED Plug and 9′ Cord

98-0001

The Top Choice for high-capacity, the 1/2 HP Zoeller M98 automatic Sump Pump is designed to remove groundwater from basement sump applications. The pump comes standard with the Zoeller LED Plug that allows you to check for power at a...