Model 810 Progressing Cavity Grinder Pump

The 1 HP Model E810 nonautomatic Progressing Cavity Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product SKU:

810-0004-1
Categories:

Have a question? Give us a call!

877-710-7867
Model 810 Progressing Cavity Grinder Pump

The 1 HP Model E810 nonautomatic Progressing Cavity Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product Details

Our Model 810 Progressing Cavity Grinder Pump is designed to pump raw sewage in sewage ejector applications when pumping to pressurized sewer main.  Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice ® cutter technology.  This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.

The E810, should use a control panel and control switches allowing it to turn the pump on when called upon.  The Model 810 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications.  The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product Specifications

Horsepower:

1 HP

Voltage:

230 V

Phase:

1 Ph

Amps:

7

Hertz:

60 Hz

RPM:

1725

Discharge:

1-1/4" NPT horizontal

Solids Handling:

Slurry

On/Off Points:

Variable level- customer set

Impeller Type:

Hydraulic rotor and stator

Cord Length:

20' (6 m)

Customers Also Buy
Duplex Pivot Control Panel, 7-15 Amps image
  • Panneau de contrôle
Duplex Pivot Control Panel, 7-15 Amps

32324-0001

The Duplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 7-15 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing two...

Simplex Pivot Control Panel, 7-15 Amps image
  • Panneau de contrôle
Simplex Pivot Control Panel, 7-15 Amps

31324-0001

The Simplex Pivot Control Panel for 115/200/230 V, 1 Ph lift station pump applications ranging from 7-15 Amps.  The panel comes with built-in audible and visual alarms.  Now you can get Zoeller quality in the whole system by pairing a...

4 Float Bracket Assembly image
  • Accessoires et pièces détachées
4 Assemblage du support du flotteur

10-0253

The 4 cord grip float bracket makes it easy to install up to 4 weighted level control float switches inside of your basin.

20′ Variable Level Control Switch image
  • Interrupteurs de contrôle
20′ Variable Level Control Switch

10-0744

The variable level control switch allows you to adjust the on and off points in a pump tank.  Intended for use with a control panel, the float signals to the control panel to activate a nonautomatic pump based on the...

25′ Narrow Angle Level Control Switch image
  • Interrupteurs de contrôle
25′ Narrow Angle Level Control Switch

10-1881

The narrow angle control float allows you to adjust the on/off points in the basin optimizing pump run time.  The floats signal to the control panel to activate the nonautomatic pump based on the liquid level for a variety of...