Model 807 Grinder Pump

The 1 HP Model N807 nonautomatic Grinder Pump is designed to remove sewage from sewage ejector applications.  This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product SKU:

807-0002-1
Categories:

Have a question? Give us a call!

877-710-7867
Model 807 Grinder Pump

The 1 HP Model N807 nonautomatic Grinder Pump is designed to remove sewage from sewage ejector applications.  This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 3-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product Details

Our Model N807 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump.  The N807 is a nonautomatic pump equipped with a single piggyback float switch.  The piggyback float switch allows you to set the on and off point of the pump in the field.  This is ideal in an application with a deep sump pit or pump tank.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 807’s motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Product Specifications

Horsepower:

1 HP

Voltage:

115 V

Phase:

1 Ph

Amps:

11

Hertz:

60 Hz

RPM:

3400

Discharge:

1-1/4" NPT

Solids Handling:

Slurry

On/Off Points:

13" (33 cm) / 5-3/4" (14.6 cm)

Impeller Material:

Engineered plastic

Impeller Type:

Vortex

Cord Length:

15’ (5 m)

Customers Also Buy
15′ 13 Amp Single Piggyback Variable Level Float Switch image
  • Accessoires et pièces détachées
15′ 13 Amp Single Piggyback Variable Level Float Switch

10-0035

The 15’ single piggyback variable level float switch allows you to adjust the on/off points on a nonautomatic pump rated for 230 V and 13 amps or less.  The switch can be used in a variety of applications including sump,...

2″ Quiet Check Valve image
  • Accessoires et pièces détachées
2″ Quiet Check Valve

30-0048

The 2" Quiet Check Valve is designed for sewage and effluent applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.  

Model 820 Grinder Pump with Switch image
  • Pompes
Model 820 Grinder Pump with Switch

820-0011-1

The 2 HP Model WD820 automatic Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a...

915 Simplex Grinder Package System with an M807 image
  • Systèmes et ensembles préassemblés
915 Système d'ensemble de broyage Simplex avec un M807

915-0086-1

The Model 915 with the Model 807 grinder pump is an economical 24" x 24" preassembled sewage ejector system ideal for those looking to install a pre-plumbed, job ready system.  This package ships complete with the Model M807, a 1...