EI4405 Sewage Pump with 20′ Cord

  • 200-230 V sewage pump for use in sewage lift stations and storm water removal applications
  • 3 HP, oil-filled motor and cast iron motor housing for optimal heat dissipation
  • 100% Testé en usine
  • Voir plus de détails

The 3 HP Model EI4405 nonautomatic Sewage Pump is designed to remove raw sewage, or ground water in sewage applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Référence produit :

4405-0004

Code produit universel :

053514053215
1
année limitée
garantie
Catégories
1
année limitée
garantie

Une question ? Appelez-nous !

877-710-7867
Sewage ejector pump, 4044-0004, 4405-0004

The 3 HP Model EI4405 nonautomatic Sewage Pump is designed to remove raw sewage, or ground water in sewage applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Détails du produit

Our Model EI4405 Sewage Pumps are designed to transfer groundwater, raw sewage or effluent with a no-hassle, effortless performance. The heavy-duty construction, oversized bearings and balanced non-clogging vortex impellers allow the Model 4405 to stand up to the highest heads and maximum flows. The benefits of this series include a discharge size of 4 inches with the capacity to pass 3-inch solids. In addition, fins are added in the construction of the pump, utilizing Zoeller’s cool run design and lowering operating temperatures.

Caractéristiques et avantages
  • Moteur rempli d'huile et boîtier de moteur en fonte pour une dissipation optimale de la chaleur qui empêche la pompe de surchauffer
  • Nonautomatic operation
  • Corrosion resistant cast iron vortex impeller to allow free passage of 2" spherical solids which prevents clogging and increases reliability
  • Stainless steel screws, handle, and hardware to prevent rust and corrosion
  • La finition époxy thermolaquée offre une résistance à la corrosion et prolonge la durée de vie de la pompe dans les environnements difficiles.
  • 100% Testé en usine - chaque pompe est immergée dans l'eau et testée en usine pour garantir qu'elle fonctionne comme prévu à la réception
  • Comes with a 1-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
Caractéristiques du produit

Expédition Poids:

136 kilogramme

Expédition Dimensions:

Height 45 cm   x   Width 24 1/2 cm   x   Length 32 3/4 cm.

Chevaux-vapeur

3 HP

Tension :

200-230 V

Phase :

1 Ph

Ampères

19.0

RPM :

1750

Hertz :

60 Hz

Décharge :

4" horizontal ANSI flange

Manutention de solides :

3" (76 mm) spherical solids

Points de marche/arrêt :

Variable level- customer set

Type de roue:

Vortex

Longueur du cordon :

6 m

Les clients achètent aussi
6030-0203
  • Accessoires et pièces détachées

4″ Flanged Check Valve

The 4" flanged check valve is designed for sewage applications to prevent backflow. This valve can be installed in the vertical or horizontal orientation in the discharge line.

Voir le produit